Instead of smoke - Squape A(rise) MTL 22mm
The SQuape A[rise] 22mm MTL is an RTA produced in Switzerland by the StattQualm brand. The A[rise] 22mm MTL is the small version of the well-known SQuape A[rise] from 2020 and also the 10th anniversary model. With this model, A[rise] X for short, Stattqualm is focusing entirely on its origins - MTL vaping - and incorporating the technical developments of the last ten years. User-friendliness, safety, quality and taste have always been StattQualm's top priorities. If you want an RTA that works reliably, is leak-proof (even in extreme conditions) and offers an excellent taste experience, then the SQuape A[rise] X RTA 22mm MTL will give you a lot of pleasure.
This model offers you a pure MTL solution. The air nozzle kit included in the set allows easy conversion with four different air settings. Additional air nozzles are available. The vaporizer can also be used entirely without air nozzles.
Based on ten years of experience, the SQuape A[rise] 22mm MTL has the following advantages to offer: clever airflow, non-conductive surface structure of the entire vaporizer chamber made of ematalized aluminium, haptically simple closing of the tank with a simple twist and generous filling holes. Thanks to the self-contained system, the tank can be transported separately from the base even when full.
Before using the tank for the first time, it is necessary to insert the enclosed closing ring. (See operating instructions)
Properties
- elegant and simple design
- easy filling by turning the TopCap (TopFilling)
- Air and liquid flow adjustment by turning the tank
- SingleCoil operation
- adjustable 510 connection (gold-plated)
- Access to the coil when the tank is full
- lockable and leak-proof tank, even when dismantled.
- non-conductive components inside the vaporizer chamber
- user-friendly installation of the heating coils
- replaceable viewing window
- Temp. control and volt/watt suitable
- easy change between the three positions; "remove", "vape" (with airflow and liquid flow adjustment) and "closed" by turning the tank. Area of application
Stattqualm recommends using the SQuape A[rise] 22mm MTL in the resistance range between 0.5 and 2 ohms and in the power range between 7 and 28 watts. It is possible to use the vaporizer above or below the stated specifications - however, any liability is excluded. Please note that the device can heat up if the power is too high. The use of this device is at your own risk.
Technical data
Scope of delivery
- 1x SQuape A[rise] 22mm MTL partially assembled
- 1x SQuip Tip A 22mm MTL
- 1x MTL Kit (4 stainless steel air nozzles in 0.8mm, 1.0mm, 1.5mm, 2.0mm)
- 1x SQ Grip Band
- 1x 3mm Allen key
- Various spare screws and O-rings
- 1x instruction leaflet
