With the compact and handy Mini Robot, Steam Crave, which is better known for large and powerful devices, is launching a sophisticated and truly impressive MTL kit.�With a diameter of 23 mm and its stainless steel finish, the Mini Robot not only fits comfortably in the hand, but also conveys its high quality. An 18650 battery is required for operation, which is not included in the scope of delivery.�
The mod's great size was achieved by doing away with all the "bells and whistles," such as a display and USB port. This is important to know, because you need a separate charger (not included) to charge the battery. The fire button is the only control. Clicking it five times turns the device on and off, while clicking it three times adjusts the power. This is where the built-in LED light comes into play, displaying the set power in three colors. When the light is red, the power is 3.5V, when it is yellow, the power is 3.8V, and when it is green, the power is 4.2V. Pressing the button twice displays the battery level, again using the LED light, which shows the battery level in the three colors. The LED light also displays any errors.
Steam Crave has also equipped the Mini Robot Kit with protective circuits such as overheating protection, reverse polarity protection, resistance protection, overcurrent protection, short circuit protection, low battery protection, and a 10-second cut-off to ensure safe vaping.
The Mini Robot Mod is complemented by the Mini Robot RTA, so that the combination is perfectly matched. The Mini Robot RTA is clearly designed for MTL and restrictive DL vaping. With a capacity of 2 ml, it also offers enough space for liquid. With the included bubble glass, this can even be expanded to 3 ml. The Mini Robot RTA is very easy to fill from the top. To do this, unscrew the narrow 510 drip tip and pour the liquid into the tank through one of the 4 openings.
Unscrewing the tank from the base gives you access to the easy-to-install single coil deck. Coils from 0.35 ohms to 3 ohms with an inner diameter of 2 mm to 2.5 mm can be used here. The coil is held in place by the opposing posts and the cotton wool is placed in the recesses provided.
Steam Crave has equipped the Mini Robot RTA with a top airflow to adjust the draw behavior and draw resistance. The special thing about this airflow is that it can be adjusted to your personal needs using the included pin screws.�Included are one closed screw, two 0.8 mm pin screws, two 1.2 mm pin screws, and two 1.6 mm pin screws. This allows the draw behavior of the Mini Robot RTA to be adjusted from MTL to restrictive DL.
Features
| Product type |
Battery mod, vaping set, tube, atomizer, rebuildable atomizer |
| Manufacturer |
Steam Crave |
| Vaping needs |
MTL (mouth to lung), MTL - restrictive DTL |
| Drip tip type |
510 |
| Tank capacity |
2.0 ml |
| Liquid control |
Not available |
| Filling |
Top fill system |
| Airflow |
Adjustable via pin screws, top airflow |
| Connections |
510 |
| Display |
No display |
| Upgrade |
No |
| On/Off |
Press 5 times quickly |
| Modes |
VV |
| Battery |
1x, (not included), 18650 |
| Protective functions |
10-second cutoff, battery warning, short circuit protection, low resistance protection, overvoltage protection, overheating protection, reverse polarity protection |
| Degassing holes |
Yes |
| Material |
Borosilicate glass, stainless steel |
| Colors |
Silver, black |
| Evaporator profile |
> 23 mm |
| Diameter |
23.00 mm |
| Length |
127.5 mm |
| Origin |
USA |
Scope of delivery
| 1x replacement glass with 2 ml |
| 1x Mini Robot Tube from Steam Crave |
| 2x airflow pins 0.8 mm |
| 2x airflow pins 1.6 mm |
| 1x airflow pin blind |
| 1x bubble glass with 3 ml |
| 1x Delrin 510 drip tip |
| 2x SS316 coil with 0.45 ohms |
| 1x Steam Crave sticker |
| 1x Mini Robot RTA from Steam Crave |
| 1x Screwdriver |
| 1x Spare Parts Bag |
| 1x instruction manual |
