Dicodes - Dani Box Micro
The Dani Box from Dicodes has never been this small!
With the Dani Micro Box, Dicodes is launching a powerful device with a full range of functions. The Micro offers all the functions of its larger "siblings." However, it does have one new feature: the Dani Box Micro is the first Dani Box that allows the battery to be charged using a USB C cable (USB C cable not included).
The Dani Micro Box is made of the best stainless steel and anodized aluminum. With dimensions of 75.5 mm x 36.7 mm x 23.0 mm, vaporizers up to 23 mm can be used.
The Dicodes Micro battery carrier is powered by an 18650 battery that is inserted from the bottom. The maximum output is 80 watts. The built-in Dicodes chip enables 4 different operating modes: variable wattage (VW), variable wattage mode with heat protection, variable wattage mode with power amplifier, and variable temperature mode.�The advanced functions can be switched on or off, making the menu much clearer without the advanced functions.
The Dani Micro Box has been equipped by Dicodes with two control buttons and a fire button. These are located on the front. The OLED display shows all important information and, like the buttons, is located on the front. The display can be set so that it is only shown when the fire button is pressed. It can also be set to stealth mode, in which case it is not visible.
Display (OLED)
Power boost function
In addition to the temperature and other settings, the power boost function is particularly interesting.
This allows you to activate a short-term power increase (boost) to the value set under Boost Power, which takes precedence over the set power. In addition to the different boost times, there are other options in the form of a periodic boost, i.e., additional boosts at different intervals. The initial boost serves to heat up the heating coil quickly. The repeated increase in power causes the heating coil to constantly pass through a certain temperature range. In this case, the different flavors in the e-liquid, which develop their taste at different temperatures, can be tasted better.
Dicodes recommends setting the nominal power to a significantly lower value for periodic boosting than when vaping without power boosting, as otherwise the total power input is quite high and a high temperature is reached.�
